Description
DRW-216 Conc. 12% Die Coat
DRW-216 Conc. 12% Die Coat is a water-based synthetic concentrated die lubricant specifically developed for high-pressure die casting of aluminum alloys. It forms a uniform protective film on the die surface, ensuring excellent release performance, reducing molten metal adhesion and die build-up, extending die life, and improving the surface finish of cast components.
Its concentrated formulation provides economical consumption while allowing the dilution ratio to be adjusted according to production requirements.
Features
- Water-based synthetic die lubricant
- Designed for aluminum die casting
- Economical concentrated formulation
- Excellent die release performance
- Reduces die build-up and molten metal adhesion
- Extends die service life
- Improves casting surface quality
- Suitable for automatic and manual spraying systems
Instructions for Use
DRW-216 Conc. 12% Die Coat is supplied as a concentrate and must be diluted with water at an approximate ratio of 1:100 to 1:200 before use.
*Note: The dilution ratio depends on die temperature, alloy type, die design, machine settings, and other process parameters.
Shake the original container gently before use to ensure a homogeneous mixture. Apply the diluted solution evenly to the die surface using an automatic spray system or a manual spray gun.
Important Notes
- Recommended die temperature: 200°C–300°C
- Protect from direct sunlight.
- Store between +5°C and +35°C.
- Use only in well-ventilated areas.
- Avoid swallowing or inhaling the product.
- Prevent contact with skin and eyes.
- Wear a protective mask, heat-resistant gloves, and appropriate personal protective equipment during use.
Product Reviews
Reviews
There are no reviews yet.